+86-13819126663
Vochtvanger Ontvochtiger video

Vochtvanger Ontvochtiger

138L Ontvochtiger

Beschrijving

moisture absorber dehumidifiermoisture absorber dehumidifier

Model DH-5138C
Vochtigheid verwijderen 138L / D
Krachtbron 220V / 50Hz
Nominaal vermogen 1800W
Nominale vermogensstroom 7.8a
Werk temperatuur 5-38 ℃
Circulerende lucht 1000m3 / h
koelmiddel R22
Netto gewicht 54kg
Bruto gewicht 58kg
Ruimte toepassen 120 ~ 160m2
Eenheidsafmeting (mm) 408x480x1030
Verpakkingsgrootte (mm) 550x455x1135
Het laden van de hoeveelheid 72pcs / 20ft
Betalingstermijn T / T
Productie periode 5 dagen
Geldige datum 30 dagen

Productfoto's:

moisture absorber dehumidifier

moisture absorber dehumidifier

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

Moet u het venster sluiten wanneer u de ruimte ontvochtigt?

Wanneer ontvochtiging is vereist om het venster te sluiten, weten we dat het principe van ontvochtiging is dat wanneer het koelmiddel in de verdamper verdampt, er een grote hoeveelheid warmte wordt geabsorbeerd, waardoor de oppervlaktetemperatuur van de verdamper wordt verlaagd en de waterdamp in de binnenruimte vloeibaar wordt lucht in water. Dit condensaat stroomt door de uitlaatpijp naar de waterpan en de kamer uit. Op dit moment moet u het venster sluiten, anders komt de buitenvochtigheid weer binnen. Het zal leiden tot het gevaar van onvolledige ontvochtiging, dus het is het beste om het venster te sluiten.


Ten eerste, hoe lager de temperatuursinstelling tijdens ontvochtiging, hoe beter het ontvochtigingseffect evenredig is met het stroomverbruik. Wanneer de functie ontvochtiging is ingesteld, moet de omkeerklep van het compressorsysteem voortdurend worden omgedraaid om deze een tijdje te koelen, en de verwarming wordt een tijdje aangehouden om de kamertemperatuur constant te houden. De babycompressor werkt continu zonder te laden.


Ten tweede, in de ontvochtigingsmodus, in vergelijking met de koelmodus, energie besparen, omdat de werking van de compressor in de ontvochtigingsmodus intermitterend is, wanneer de omgevingstemperatuur hoger is dan de omgevingstemperatuur, is de ingestelde temperatuur meestal lager dan 27C voor algemene Wanneer de koeling is op 35C, de compressor stopt nauwelijks. Intermitterende werking bespaart meer vermogen wanneer de compressor wordt in- en uitgeschakeld in de ontvochtigingsmodus, maar er moet aan worden herinnerd dat de functie ontvochtiging de koelfunctie niet vervangt.


Bij gebruik in ontvochtigingsmodus draait de binnenventilator altijd op lage snelheid, wordt de compressor aan en uit gezet en wordt het koelsysteem gebruikt voor onderbroken koelcyclus. De resulterende koelcapaciteit wordt voornamelijk gebruikt om de latente warmte van de binnenlucht in evenwicht te brengen. De waterdamp verandert in gecondenseerd water. Een klein deel wordt gebruikt voor het balanceren van voelbare warmte, wat is het verlagen van wat kamertemperatuur. Wanneer de compressor is gestopt, zal de kamertemperatuur langzaam stijgen. Wanneer het oploopt tot ongeveer 1C boven de ingestelde temperatuur, start de compressor automatisch, zodat deze continu kan circuleren, waarbij de kamertemperatuur dicht bij de ingestelde waarde blijft, terwijl er een grote hoeveelheid vocht uit de lucht wordt verwijderd.


We weten dat in de lente de ontvochtigingsmodus kan worden gebruikt. De ontvochtigingsfunctie is een zeer praktische functie. Bespaar geld, niet alleen als u een ontvochtiger moet kopen. En de snelheid van ontvochtiging is ook relatief snel. Het kan mensen helpen om de luchtvochtigheid effectief in te stellen. Vooral voor bewoners op de eerste verdieping, als het weer matig groot is, kunt u proberen om de ontvochtigingsfunctie te kopen. Na ontvochtiging kan het vochtgevoel vóór ontvochtiging worden verminderd en kan het onaangename vochtige gevoel worden weggenomen.


Neem voor meer informatie alstublieft contact op met onze projectontwikkelingsmanager, zoals hieronder:

Do you need to close the window when dehumidifying the household dehumidifier? When dehumidification is required to close the window, we know that the principle of dehumidification is that when the refrigerant in the evaporator evaporates, a large amount of heat is absorbed, reducing the surface temperature of the evaporator, and liquefying the water vapor in the indoor air into water. This condensate will flow through the outlet pipe to the water pan and out of the room. At this point, you need to close the window, otherwise the outdoor humidity will enter again. It will lead to the danger of incomplete dehumidification, so it is best to close the window.  Dehumidifier dehumidification and power saving? First, the lower the temperature setting during dehumidification, the better the dehumidification effect is proportional to the power consumption. When the dehumidification function is set, it is necessary to continuously reverse the reversing valve of the compressor system to cool it for a while, and the heating is maintained for a while to keep the room temperature constant. The baby compressor will run continuously without charging.  Second, in the dehumidification mode, compared with the cooling mode, save power, because the compressor operation in the dehumidification mode is intermittent, when the ambient temperature is higher than the ambient temperature, the set temperature is mostly lower than 27C for general When the cooling is at 35C, the compressor hardly stops. Intermittent operation saves more power when the compressor is turned on and off in dehumidification mode, but it must be remembered that the dehumidification function does not replace the cooling function.  Dehumidifier dehumidification is easy to use? When operating in dehumidification mode, the indoor fan is always running at low speed, the compressor is turned on and off, and the refrigeration system is used for intermittent refrigeration cycle. The resulting cooling capacity is primarily used to balance the latent heat of the indoor air. The water vapor turns into condensed water. A small portion is used to balance sensible heat, which is to lower some room temperature. When the compressor is stopped, the room temperature will gradually rise slowly. When it rises to about 1C above the set temperature, the compressor will automatically start, allowing it to circulate continuously, keeping the room temperature close to the set value, while removing a large amount of moisture from the air.  We know that in the spring, the dehumidification mode can be used. The dehumidification function is a very practical function. Save money not only without the need to purchase a dehumidifier. And the dehumidification speed is also relatively fast. It can help people effectively adjust the humidity in the air. Especially for residents on the first floor, if the weather is moderately large, you can try to purchase the dehumidification function. After dehumidification, it can reduce the feeling of dampness before dehumidification, and can eliminate the uncomfortable damp feeling.

Populaire tags: vochtopnemer ontvochtiger China, fabrikanten, leveranciers, fabriek, groothandel

Aanvraag sturen

(0/10)

clearall